Bulk Aggregates for Patios in Fountain, FL

Order gravel and aggregate delivery in Fountain, FL by the ton or the yard. Florida Rock Supply drops bulk material at your pad, drive or build site. Start with limerock base. It compacts hard over the loose quartz sand that covers this part of Bay County, so a patio slab or paver field stays put instead of pumping and shifting.

Buy online, pick your material, set the quantity, and we haul it out. No counter runs, no trailer rentals.

Materials for Fountain Projects

Patios in Fountain hold level only on a sound bedding layer. Get that wrong and pavers rock, slab edges crack, and joints open within a season. Match the bedding to the finish and the base under it.

Bedding and base under flatwork

Limerock base is the standard Florida base rock. It is crushed limestone graded down to fines, and it locks up tight when you water and compact it. Use it as the structural base under a patio, compacted firm, then bed your pavers on top.

For the bedding course itself, limestone screenings, also called screenings or limerock screenings, are the pick. Florida screenings are crushed limestone fines. Screed them to about an inch and they give you a firm, walkable bed that pavers settle into without sinking. They also work as a path surface on their own.

Mason sand, also called masonry sand, is the other common bedding choice. It beds brick and block, fills paver joints, and doubles as play sand. Some installers prefer it under thin flagstone for a softer set.

Edging, drainage and the parts you forget

Water has to leave the patio. Run #57 Limestone, also called #57 stone or 57 stone, in a French drain or a drainage trench along the low edge. #57 stone is usually crushed limestone in Florida, and its open void space moves water fast.

Around downspouts, walkways and bed borders, 3/8" Natural Pea Gravel, or Natural Pea Gravel, is the easy finish. It is smooth underfoot and drains well.

Finish the picture with River Rock in dry creek beds and splash zones, and Shredded Mulch in planting beds, where it holds moisture in sandy ground through the long growing season.

Ground and Conditions in Fountain

This is where Fountain patios usually go wrong. A patio goes down on a thin base over deep, loose, light-colored quartz sand. Nothing ties the sand together. The first wet season, the pavers pump, the joints open, and the edges drop.

The fix is depth and compaction. Excavate down, compact the subgrade, then build limerock base in lifts and compact each one. On higher ground back from the bays, sand and gravel with clayey layers holds better, but the low flatwoods and bayfront lots sit close to the water table.

Those low lots hold water. Add a drainage layer of #57 stone or drain rock and give it somewhere to go. Rain arrives from winter cold fronts and summer thunderstorms, plus heavy tropical rain. Hurricane season runs June through November and brings the biggest washout and surge risk, so plan patio grades to shed water away from the house.

Delivery to Fountain and the Surrounding Area

Choose tons or yards first. Bulk aggregate is sold by weight, sand and soil by volume, and the two convert differently per material. Get the quantity roughly right and you avoid a half-finished patio waiting on a second load.

Estimate it this way: length times width times depth in feet, divided by 27 for cubic yards. The calculator does that for you once you enter the patio size and base depth. Screenings and sand bed thinner, so figure those separately.

Order online and we deliver to your site in Fountain and across Bay County, including Panama City, Lynn Haven, Panama City Beach and Youngstown. Place the load where you can reach it with a wheelbarrow or skid steer, not on top of the finished work.

Questions Fountain Buyers Ask

What gravel is best for a driveway in Fountain?

It is the standard Florida base rock, crushed limestone graded down to fines that compacts hard over sand. Build the drive in lifts and compact each one. Top it with driveway gravel or #57 stone if you want a cleaner surface and better drainage.

How much material will my project need?

Multiply length by width by depth in feet, then divide by 27 to get cubic yards. Add a little for compaction, since limerock base and screenings settle as they lock up. Enter the patio size and base depth in the calculator to see how many yards to plan on. Bedding runs separate from the base.

Size the Load, Then Order It

Start with the calculator to turn your patio dimensions into tons or yards. Then pick your material, limerock base, screenings or mason sand, and set the quantity. Order online and Florida Rock Supply delivers bulk aggregate to your Fountain site, sized to the job.