Skip to main content
FREE Delivery!|(813) 896-2664

Polk County, Florida ยท Free Delivery

Bulk Aggregates for Patios in Kathleen, FL

Free delivery to Kathleen on every order, with loads arriving in as fast as 2 business days.

Delivering to Kathleen, FL

Free delivery on every order.

  • Free delivery to Kathleen
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Kathleen

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Kathleen

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Kathleen

Decorative delivered to Kathleen

Rounded stone for beds, borders and water features.

Sand delivered to Kathleen

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Kathleen

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Kathleen works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Kathleen.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Kathleen addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Gravel and aggregate delivery in Kathleen, FL runs year round, but the summer rainy season sets the schedule. Afternoon storms from late spring into October soak a pad and stall the grading behind it. Order your limerock base and bedding sand before the wet weeks and the work moves.

Florida Rock Supply delivers bulk material to Kathleen and the rest of Polk County. This ground is deep quartz sand, so what you put under a patio decides how it holds up.

Materials for Kathleen Projects

On this ground, the patio is only as good as its bed. Deep sand shifts and pumps, so a thin base fails first. Get the layers right and pavers or slabs stay flat for years.

  • Limerock Base is the standard Florida base rock, crushed limestone graded down to fines so it compacts hard over sand. It is what most Kathleen patios and parking pads sit on.
  • Stone Screenings are crushed limestone fines, and they are the bedding layer that goes directly under pavers and flagstone. Screened flat, they lock the units without letting them rock.
  • Washed Sand is concrete sand for leveling and bedding under slabs and flatwork. It spreads smooth and holds grade while you set the forms.
  • Mason Sand handles brick and block work and the joints between pavers. It sweeps into the gaps and sets firm.
  • #57 Limestone is drainage stone for French drains and around foundations, and it works as concrete aggregate where the pour needs washed rock.

Ground and Conditions in Kathleen

A thin base shows up fast here. The pad flexes at the edges, joints open, and water pools in the low spots after a storm. That is what loose, fast-draining ridge sand does when it is not confined.

The fix is depth and compaction, not a thicker bedding layer. A thicker layer of limerock base, laid in lifts and watered as it compacts, bridges the soft sand underneath. Screenings go on top at about an inch.

Drainage matters just as much. Flat lots in the flatwoods hold water when a hardpan sits under the sand, so a lot that stays wet needs the grade pitched away from the slab before any base goes down.

Hurricane season runs June through November. Heavy rain can wash out bare sandy slopes, so get a limerock base down and compacted before the worst of it, and top the work with River Rock or Drain Rock where runoff concentrates.

Delivery to Kathleen and the Surrounding Area

Bulk orders are quoted by the ton or the cubic yard, and the two are not the same thing. A yard of limerock base weighs more than a yard of dry topsoil, so pick the unit your quantity is figured in and stay with it.

To estimate, multiply length by width by depth in feet, then divide by 27 for cubic yards. Convert to tons using the material's weight per yard, and round up.

Order online and Florida Rock Supply delivers to Kathleen and across Polk County, including Lakeland, Winter Haven, Haines City, Bartow and Lake Wales. Have the site clear and the drop point reachable so the load lands where the work is.

Questions About Aggregate in Kathleen

What gravel is best for a driveway in Kathleen?

Limerock base is the usual choice for a Kathleen driveway. It is the local base rock, crushed limestone with the fines left in, and it compacts hard over deep sand. Top it with #57 Limestone or Driveway Gravel for a cleaner surface. Build the base up thick in lifts, compact each lift, and the drive holds through the summer rains.

How much material will my project need?

Measure the area, then multiply length by width by depth in feet and divide by 27. That gives you cubic yards. Base material is usually sold by the ton, so convert using the weight per yard, and add a little for compaction and spillage. Ordering slightly over is safer than running short mid-job.

Get Your Material Sized and Delivered

Use the quantity calculator to turn your patio dimensions into cubic yards and tons, then check the depth your base needs. Florida Rock Supply delivers limerock base, screenings and drainage stone to Kathleen by the ton. Place your order online and we will get the load to your site.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Kathleen, FL

What gravel is best for a driveway in Kathleen?

Limerock base is the usual choice for a Kathleen driveway. It is the local base rock, crushed limestone with the fines left in, and it compacts hard over deep sand. Top it with #57 Limestone or Driveway Gravel for a cleaner surface. Build the base up thick in lifts, compact each lift, and the drive holds through the summer rains.

How much material will my project need?

Measure the area, then multiply length by width by depth in feet and divide by 27. That gives you cubic yards. Base material is usually sold by the ton, so convert using the weight per yard, and add a little for compaction and spillage. Ordering slightly over is safer than running short mid-job.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.