Washed Sand Delivery for Melbourne Beach, FL

What do you order when a Melbourne Beach lot sits too low, too wet, or too soft to build on? You start with fill and base material, and gravel and aggregate delivery in Melbourne Beach, FL puts it on your site by the ton. Florida Rock Supply supplies limerock base, fill dirt and drainage stone to Brevard County yards and job sites.

Delivery to Melbourne Beach and the Surrounding Area

Order online and pick your quantity by the ton or the cubic yard. The site shows what each material weighs and how far a ton spreads, so you can size a pad, a drive or a drainage run before you buy.

Bulk delivery arrives on a dump truck and is tailgated or dumped where your crew needs it. Tell us the gate width, the overhead lines and the soft spots, because deep sand will not carry a loaded truck.

We deliver across Melbourne Beach and the rest of Brevard County, including Palm Bay, Melbourne, Titusville, Merritt Island and Rockledge.

Materials for Melbourne Beach Projects

Most work here starts with grade. A lot that sits low or holds water needs fill before anything else goes down, and that fill has to be compacted in lifts so the base above it stays flat.

For a driveway or parking pad, order Fill Dirt to build the grade up, then Limerock Base as the compacted surface course. Limerock base is crushed limestone graded down to fines, and it locks up hard over sand.

Washed Sand levels and beds under slabs, paver fields and pool decks. For a patio or walkway, Stone Screenings give you a firm, walkable bed for pavers and flagstone.

For drainage around a foundation, pool cage or downspout, #57 Limestone and Drain Rock move water instead of holding it. Both work in French drains and trench runs.

Ground and Conditions in Melbourne Beach

This is flatwoods and coastal ridge ground: deep quartz sand over buried limestone, with a hardpan layer under many lots. Ridge sand drains fast, but flat ground sits wet for part of the year.

That hardpan is why a shallow base fails. Water stalls on top of it after a summer downpour, the sand beneath the stone stays soft, and a thin base course pumps and ruts under a truck.

Build deeper on flat or low lots. Excavate until you reach firm sand, place fill in compacted lifts, then compact a solid layer of limerock base on top so it bridges the soft layer below.

Dunes and canal banks take wave action and storm surge, so shorelines and culvert outfalls need RipRap armoring. Bare sandy slopes wash out fast in tropical rain.

Work runs year round, but the rainy season from late spring into October brings afternoon storms that saturate pads and slow grading. Hurricane season runs June through November, so plan drainage before the storms arrive.

Order Limerock Base and Fill for Your Melbourne Beach Project

Limerock base is the material most Melbourne Beach jobs come down to, whether you are raising a low pad, rebuilding a drive or setting a base under pavers. Work out your tonnage, choose your materials and place the order online with Florida Rock Supply for delivery to your site.